Redmi Pad (yunluo) HyperOS 1 Fastboot ROMs for All Regions (Android 14)

Redmi Pad (codename yunluo) is an affordable Android tablet built around a large 90Hz display, Helio G99 chipset and long‑lasting battery, ideal for media, light gaming and study use. As users move from MIUI 14 to HyperOS 1, common issues include failed OTA updates, soft‑bricks after tinkering with system files and the need for a clean Android 14 install to restore smooth performance.

After thorough research of HyperOS trackers and firmware archives, the ROMs you provided are confirmed as official HyperOS 1 Android 14 Fastboot packages for Redmi Pad (yunluo) across China, Global, India, EEA, Russia, Taiwan, Turkey and Indonesia.

File Selection Guide.

This guide helps you pick the correct HyperOS 1 Fastboot ROM for your Redmi Pad (yunluo) and understand what each file does.

• Device and codename: Firmware sites map Redmi Pad to codename yunluo, and every file you listed begins with yunluo_... or yunluo_images_..., confirming they are for this tablet only.
• HyperOS and Android version: All OS1.0.x.0.ULY* builds for yunluo are documented as HyperOS 1.0 based on Android 14, which matches the _14.0_ segment in each filename.
• Region suffixes: Xiaomi uses suffixes to mark regions: CNXM (China), MIXM (Global), INXM (India), EUXM (EEA Europe), RUXM (Russia), TWXM (Taiwan), TRXM (Turkey) and IDXM (Indonesia). Each build number you provided ends in one of these codes, so you can match your region precisely.
• Fastboot vs Recovery: HyperOS trackers show both Recovery and Fastboot variants; the yunluo_*_images_....tgz packages here are the Fastboot ROMs used from a PC for full reinstalls and unbrick situations.
• Changelog focus: For OS1.0.9.0.ULYMIXM and OS1.0.10.0.ULYINXM, official notes highlight updated Android security patches (for example April 2025 for Global and June 2025 for India) and “increased system security” as the main changes; no extra features are listed.
• When to use these Fastboot ROMs: These files are best when your Redmi Pad won’t update via OTA, is stuck in a bootloop, or you want a fresh HyperOS 1 Android 14 install after heavy modifications.

Download Official Firmware for Redmi Pad (yunluo)

Redmi Pad (yunluo) Device + Firmware Details

⚠️Flashing Requirements

📱How to Flash the Firmware

Method 1: HyperOS 1 Fastboot ROM via Mi Flash Tool

1. Download and extract: Download the correct Fastboot ROM for your region (for example yunluo_global_images_OS1.0.9.0.ULYMIXM_20250416.0000.00_14.0_global_f8dbb84a10.tgz for Global or yunluo_in_global_images_OS1.0.10.0.ULYINXM_... for India) and extract it on your PC.
2. Enter Fastboot mode: Power off Redmi Pad, boot into Fastboot mode and connect it to your Windows PC with a USB‑C cable.
3. Select ROM in Mi Flash: Open Mi Flash Tool, click “Select” and choose the extracted yunluo ROM folder, then confirm that the tablet appears in the device list.
4. Flash HyperOS 1: Choose the desired flash option (clean flash is best for fixing serious issues), click “Flash” and wait until Mi Flash completes installation of the OS1.0.x.0.ULY* build.
5. Reboot and set up: Allow the Redmi Pad to reboot into HyperOS 1 Android 14, wait for the first boot to finish, then go through the setup wizard and restore your backups.

For a full Mi Flash tutorial with images and driver links, follow: Full Tutorial: How to Flash Xiaomi Firmware with Mi Flash Tool.

Method 2: Fastboot Script (flash_all.bat) for Official yunluo ROMs

1. Unpack the Fastboot ROM: Extract your selected .tgz (for example OS1.0.9.0.ULYMIXM or OS1.0.10.0.ULYINXM) and locate the flash_all.bat script inside the ROM folder.
2. Connect in Fastboot: Put the Redmi Pad into Fastboot mode, connect it to the PC and confirm fastboot commands can see the device.
3. Run the script: Run flash_all.bat to flash all main partitions for that HyperOS build; these scripts are usually configured as full wipes.
4. Wait for completion: Keep the tablet connected until the script reports success and the device is ready to reboot.
5. First HyperOS boot: Let the system boot into HyperOS 1 Android 14 for the first time, then configure apps and restore your data.

For more detailed guidance on flash_all.bat and similar scripts, see: How to Flash Stock Firmware Using a Fastboot Script (flash_all.bat).

Frequently Asked Questions (FAQs)

Is OS1.0.9.0.ULYMIXM an official HyperOS 1 update for Redmi Pad (yunluo)?

Yes, Xiaomi ROM trackers list OS1.0.9.0.ULYMIXM as a Global HyperOS 1 Android 14 Stable build for Redmi Pad with codename yunluo, and they show matching Recovery and Fastboot packages.

What does HyperOS 1 OS1.0.9.0.ULYMIXM change on Redmi Pad Global?

The official changelog for OS1.0.9.0.ULYMIXM states that it “updated the security patch to April 2025” and “increased system security”, without listing extra new features.

How do you choose the right HyperOS 1 Fastboot file for Redmi Pad (yunluo)?

Check Settings → About device for your region build (MIXM, INXM, EUXM, RUXM, TWXM, TRXM or IDXM) and download the yunluo OS1.0.x.0.ULY* Fastboot ROM that ends with the same suffix, avoiding cross‑region flashing.

Is Redmi Pad (yunluo) listed as a HyperOS 1 device and eligible for future HyperOS 2 updates?

HyperOS 1 and Android 16 eligibility lists include Redmi Pad (yunluo) among supported devices, and current trackers show multiple HyperOS 1 Android 14 builds released for it.

Can these yunluo HyperOS 1 Fastboot ROMs fix bootloops or failed OTA updates?

Fastboot ROMs like OS1.0.9.0.ULYMIXM and OS1.0.10.0.ULYINXM are designed to rewrite all major system partitions, so they are commonly used to recover Redmi Pads from software‑related bootloops and OTA failures as long as Fastboot mode still works.

Are there any official feature changes listed for OS1.0.10.0.ULYINXM and OS1.0.10.0.ULYTWXM beyond security?

The update tracker entries for OS1.0.10.0.ULYINXM and OS1.0.10.0.ULYTWXM only mention updated security patches to June 2025 and increased system security; no extra new features or UI changes are documented.